Arcam DT91 Car Stereo System User Manual


 
DT91
E-14
English
DT91
E-15
Radio station information / Informations sur la station radio /
Radiosenderinformationen / Zenderinformatie

Request information on the current radio station.
Demande des informations sur la station radio actuelle.
Abfragen von Informationen zum aktuellen Radiosender.

Vraag naar informatie over de huidige zender.
Example / Exemple / Beispiel / Voorbeeld

Command/response sequence to request the station frequency, where
the source is FM and the frequency is 105.2MHz:
Séquence de commande/réponse pour demander la fréquence de la
station, la source étant FM et la fréquence 105,2 MHz :
Befehls-/Rückmeldesequenz zum Abfragen der Senderfrequenz. Die
Quelle ist FM (analog) und die Frequenz 105,2 MHz:

Opdracht- en responsreeks voor het vragen naar de zendfrequentie, met
als bron FM en de frequentie 105.2Mhz:
COMMAND: 0x21 0xDF 0x02 0xF3 0x00 0x0D
RESPONSE: 0x21 0xDF 0x01 0x03 0x00 0x69 0x14 0x0D
Example / Exemple / Beispiel / Voorbeeld

Command/response sequence to request the signal strength, where the
current signal strength is 10:
Séquence de commande/réponse pour demander la puissance du signal,
la puissance du signal actuelle étant de 10 :
Befehls-/Rückmeldesequenz zum Abfragen der Signalstärke. Die aktuelle
Signalstärke ist 10:

Opdracht- en responsreeks om de signaalsterkte na te vragen, waarbij de
signaalsterkte 10 is:
COMMAND: 0x21 0xDF 0x02 0xF3 0x01 0x0D
RESPONSE: 0x21 0xDF 0x01 0x02 0x0A 0x00 0x0D
FM frequency selection / Sélection de la fréquence FM /
FM-Frequenzauswahl / Selecteren van FM-frequentie

Increment/decrement the FM frequency selection.
Incrémente/décrémente la sélection de la fréquence FM.
Erhöhen/Verringern der FM-Frequenzauswahl

Selecteren van hogere/lagere FM-frequentie.
Example / Exemple / Beispiel / Voorbeeld

Command/response sequence to decrement the station frequency, where
the new frequency is 97.9MHz:
Séquence de commande/réponse pour décrémenter la fréquence de la
station, la nouvelle fréquence étant 97,9 MHz :
Befehls-/Rückmeldesequenz zum Verringern der Senderfrequenz. Die
neue Frequenz ist 97,9 MHz:

Opdracht- en responsreeks om een lagere zenderfrequentie te selecteren,
met als nieuwe frequentie 97.9Mhz:
COMMAND: 0x21 0xE4 0x01 0xF1 0x00 0x0D
RESPONSE: 0x21 0xE4 0x01 0x02 0x61 0x5A 0x0D
COMMAND:
Byte: Description:
CC 0xE4 (Command code)
DL 0x01 (Data length)
D1 0xF0 – Increment the tuned frequency
0xF1 – Decrement the tuned frequency
0xF3 – Request the current tuned frequency
RESPONSE:
Byte: Description:
RC 0xE4 (Reply Code)
AC Answer code
DL 0x02 (Data length)
D1 MHz of current frequency
D2 kHz (*10) of current frequency
COMMAND:
Byte: Description:
CC 0xDF (Command code)
DL 0x02 (Data length)
D1 0xF3 – Request station information
D2 0x00 – Request the station frequency (FM
only)
0x01 – Request the station signal strength
0x02 – Request the station MPEG mode
0x04 – Request the station data rate
RESPONSE:
Byte: Description:
RC 0xDF (Reply Code)
AC Answer code
DL 0x03 (Data length)
D1 0x00 – Message contains station freq.
0x01 – Message contains signal strength
0x02 – Message contains MPEG mode
0x03 – Message contains data rate
D2 Response to the FM frequency request:
MHz of current frequency
Response to the DAB MPEG mode request:
0x00 – Stereo
0x01 – Joint stereo
0x02 – Dual mono
0x03 – Mono
Response to the DAB data rate request:
0x00 - 0xE0 (0 - 224kb/s) – data rate
Response to the signal strength request:
0x00 - 0x10 – signal strength
D3 Response to the FM frequency request:
kHz (*10) of current frequency
Response to the DAB MPEG mode request:
0x00
Response to the DAB data rate request:
0x00
Response to the signal strength request:
0x00