Alpine CDA-9856 Car Stereo System User Manual


 
27-EN
Mechanism error.
1) Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
When “ERROR” is displayed:
If that the disc cannot be ejected by pressing , press the RESET
switch (refer to page 7) and press again.
If the disc still cannot be ejected, consult your Alpine dealer.
A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
A disc is left inside the CD Changer.
- Press the eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
No magazine is loaded into the CD Changer.
- Insert a magazine.
No indicated disc.
- Choose another disc.
The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels 0 and 1
should function normally.
XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
Radio is acquiring audio or program information.
- Wait until the radio has received the information.
The channel currently selected has stopped broadcasting.
- Select another channel.
The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
Indication for CD Changer
Indication for SAT Receiver Mode
(SIRIUS mode)
(XM mode)
Scrolling display only once
(SIRIUS mode)
(XM mode)
Scrolling display only once