Filter
Top Products
16-EN
CD/MP3/Changer Operation (Optional)
File/Folder Search (concerning MP3)
You can select an MP3 file from the file/folder
name list and play back.
1 When the monitor is open in MP3 mode, press
and hold the Rotary encoder for at least 2
seconds during playback.
The unit switches to File/Folder Search mode,
and the file/folder name list is displayed.
2 Press g or f to select the desired file or
folder.
Press and hold -/J for at least 2 seconds to
select File Search or Folder Search.
When the folder name list is displayed:
If there are files in the folder, a triangle appears
by the side of each folder name.
Select the desired folder and press and hold
-/J for at least 2 seconds to display file name
list, and then press g or f to select the
desired file.
When the file name list is displayed:
To search for other folders containing desired
files, press and hold -/J for at least 2 seconds
to display the folder name list.
3 Press the Rotary encoder to execute the
setting.
The selected file, or the first file of the selected
folder starts to play.
NOTE
During search, press and hold the Rotary encoder for at
least 2 seconds to cancel the File Search mode.
gg
gg
g
ff
ff
f Rotary
encoder
::
::
:/
JJ
JJ
J
SOURCE/PWR
Disc select buttons
(1 through 6)
MUTE/SETUP
Controlling CD Changer
An optional 6-disc or 12-disc CD Changer may be
connected to the CVA-1004 if it is Ai-NET
compatible. With a CD Changer connected to the
Ai-NET input of the CVA-1004, the CD Changer
will be controllable from the CVA-1004.
Using the KCA-400C (the Multi-Changer
Switching device) or the KCA-410C (Versatile Link
Terminal) multiple changers can be controlled by
the CVA-1004.
See the “Multi-Changer Selection” (page 17) for
selecting the CD Changers.
NOTE
The controls on the CVA-1004 for CD Changer operation
are operative only when a CD Changer is connected.
1 Press SOURCE/PWR to activate the CD
Changer mode. The display shows the disc
number and track number.
NOTES
•
The source indicator varies depending on the
connected source.
•
Press BAND/TEL. to switch the Disc mode in the CD/
Changer mode.
2 Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CD player.
For details, please see elsewhere in this section.
• When the “FUNC” indicator is lit in red in the
monitor, or is lit in the sub-display, the disc select
buttons become nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the
procedure is the same as for the 6-disc CD
Changer. To select discs numbered from 7 to 12,
first press FUNC. In the sub-display, this changes
the "D" indicator to "d." The "FUNC" indicator is
lit in yellow on the monitor. Then press the
desired disc select button. With FUNC activated,
the disc select buttons 1 to 6 will represent discs
7 to 12 respectively.
Preset 6BAND/TEL.
FUNC