Filter
Top Products
37-EN
Other Useful Features
∗
2
Setting the Visual Effect mode:
The Viual Effect mode can be set when a
video source (e.g. DVD) is selected in AUX1/
AUX2/AUX3.
1 Press and hold TITLE
for at least 2
seconds. Each press toggles the setting
between ON and OFF.
2 When Visual Effect is set to ON, press
TITLE
to select the desired mode.
MODE3 can be selected when 2 rear
monitors are connected and the Rear monitor
setting is ON (page 36).
NOTE
When AUX IN
∗
3
(AUX1 IN
∗
3,
∗
4
, AUX2 IN
∗
4
, AUX3 IN)
and NAV.IN are set to ON, the EXTERNAL INPUT is
displayed during the source and SIMUL switching.
∗
3
When a DVD player or DVD changer is connected, DVD
player or DVD changer is displayed in the display.
∗
4
When more than two DVD players or DVD changers
are connected, DVD player is displayed in AUX1 IN,
and DVD changer is displayed in AUX2 IN.
For any other settings, press preset 3 or another
preset button.
4 After setting is completed, press the MUTE/
SETUP to return to normal mode.
Setting Front/Rear/Subwoofer Preout
of the External Expansion Box
You can use Front/Rear/Subwoofer Preout with the
optional expansion box (KCE-104V). Set to ON to use
KCE-104V preout.
After carrying out steps 1 to 3 of “To display the SETUP
screen” (page 29), perform the operation shown below.
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2 Press preset 5 to activate the SYSTEM setting
mode. Press preset 5 again to select EXPAND
PREOUT.
3 Press g or f to select ON or OFF.
Select ON to use the preout (Front/Rear/Subwoofer) of
the optional expansion box (KCE-104V).
For any other settings, press preset 5 or another
preset button.
4 After setting is completed, press MUTE/SETUP
to return to normal mode.
CAUTION
Make sure that the preout of the external expansion box
is set to OFF when using the CVA-1004 internal
amplifier. Note that if the preout is set to ON, the volume
level will be too high.
Setting the External Input
After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.
1 When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2 Press preset 3 to select the AUX setting mode.
Press preset 3 to select the desired external
input, AUX IN or NAV.IN.
• If the expansion box KCE-104V (not supplied)
is connected and the unit is set to Expand Box
KCE-104V (ON) (page 35), you can select AUX
1/AUX 2/AUX 3/NAV.IN.
3 Press preset 3 to set AUX IN, NAV. IN, AUX
NAME, SYNC MODE, and press g or f to
select the desired setting.
When the expansion box is not connected
AUX IN:
ON ↔ OFF
NAV.IN:
ON ↔ OFF
When the expansion box is connected
AUX IN (AUX1/2):
ON ↔ OFF
AUX IN (AUX3):
AUX NAME (example of when AUX1 is set):
SYNC MODE:
(adjusting the Visual Effect
∗2
display)
(Adjust when the Visual Effect display with the
KCE-104V connected is not clear. The Visual
Effect display can be distorted depending on the
input picture from external devices. )
NAV.IN:
ON ↔ OFF
∗
1
Setting for rear camera:
With CAMERA selected in the AUX3 setting,
the picture from the rear camera is displayed.
Connect your vehicle’s reverse lamp to the
KCE-104V, to view the rear camera’s image
whenever the car is in Reverse gear (you can
still listen to the currently selected source).
→ OFF ↔ ON ↔ CAMERA
∗1
←
→ MODE 1 ↔ MODE 2 ↔ MODE 3 ←
→ MODE1 → MODE2 → MODE3 → MODE4
→ AUX-1 ↔ DVD-1 ↔ VCR-1 ↔ GAME-1 ↔ TV-1 ←