Filter
Top Products
20
Amplifi er assembly replacement continued:
6
Closeups of the led PCB cable and
connector are shown above. The black
wire of the cable is closest to the ribbon
cable. The cable only fi ts in one way.
1
1
7
Now for the closeups of the woofer and
driver terminals. Make sure the cables
are reconnected to the same terminals
they were removed from (but on the
new amplifi er assembly). Once again,
they are: (2) solid yellow, (3) solid black,
(4) blue and black, (5) solid blue,
(6) green and black, and (7) solid
green. Do not force cable removal
or connection, although needle-nose
pliers may aid in loosening the crimped
cables.
5
4
3
2
6
7
Edge of
amplifi er
assembly
5
43
2
6
7
Edge of
amplifi er
assembly