ATD-2150 - 1 - Rev. 3/19/09
HEAVY DUTY AIR HAMMER
ATD-2150
Blows Per Minute ............................4,300 BPM
Bore Diameter .................................. 3/4"
Piston Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7"
Air Inlet .................................1/4"-18 NPT
Hose Size ..................................3/8" I.D.
Rec. Air Pressure . . . . . . . . . . . . . . . . . . . . . . . .90 psig (6.2 bar)
Avg. Air Consumption .......................... 4.12 cfm
Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 dBA
Length ........................................5.1"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Lbs.
SPECIFICATIONS
Some dust created by power
sanding, sawing, grinding, drilling,
and other construction activities
contains chemicals known to cause
cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
• leadfromlead-basedpaints,
• crystallinesilicafrombricks
and cement and other
masonry products, and
• arsenicandchromiumfrom
chemically-treatedlumber.
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work
in a well ventilated area, and work
with approved safety equipment,
such as those dust masks that are
specially designed to filter out
microscopic particles.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
• ALWAYSWEARAPPROVEDEAR
AND EYE PROTECTION.
• ALWAYSOPERATEATMAX.AIR
PRESSURE OF 90 PSIG, 6.2 BAR.
• REPETITIVEMOTION/EXTENDED
EXPOSURETOVIBRATIONMAY
HARMHANDS/ARMS.
This insTrucTion Manual
conTains iMporTanT
safeTy inforMaTion
read carefully and
undersTand all
in for Ma Tion BEFORE
operaTing This Tool!
save This Man u al
for fuTure ref er ence.
