Audiovox 128-6210A Car Stereo System User Manual


 
128-6210A
9 of 12
9
DISPLAY MESSAGES
When problems are encountered during XM
®
system operation, a mes-
sage may appear on the display. The following table outlines the most
common problems and provides a probable cause(s) for each and a
suggested corrective action(s) to restore normal operation.
LCD BACKLIGHT COLOR SHIFT CODES
The backlight color for the LCD display can be either Green or Amber;
to select the desired color, enter one of the following codes:
1. Green------51
2. Amber---- 52
CATEGORY/NORMAL SELECTION MODE SHIFT CODES
To invoke the category selection mode:
1. Category------ 81: A channel change is possible only within the
same category or group.
2. Normal-----80: Return operation to the normal mode, whereby
channels can be selected in sequential order up or down.
Display Messages
EGASSEMNOITINIFEDDEDEENNOITCA
GNITADPUhtiwdetadpugniebsiURR
.edocnoitpyrcnetsetal
sahetadpuedoclitnutiaW
slennahc;detelpmocneeb
noitcnufdluohs100dna000
.yllamron
RIAFFOyltnerruclennahcehT
deppotssahdetceles
.gnitsacdaorb
.lennahcrehtonatceleS
GNIDAOLMXgniriuqcasimetsyS
margorprooidua
.noitamrofni
sahmetsysehtlitnutiaW
.noitamrofnilladeviecer
LANGISONlangis,kaewro,fossoL.annetnakcehC.1
.noitacolegnahC.2
ANNETNAdetcennocsidelbacannetnAelbacannetnayfireV
.detcennoc
CHANNEL SKIP SHIFT CODE
If you wish to prevent acquisition of a particular channel during the
channel selection process:
1. Skip Channel----91: The channel will be skipped over during
channel selection.
2. Recover Channel---- 90: Regain access to the channel by using
the direct selection method (shift plus station number) to select
the skipped channel; then enter code 90.