Audiovox 128-7902A Car Satellite Radio System User Manual


 
19
a. Installing the Cradle and Interconnecting Cables - Locate the
Interconnect Cradle in a readily accessible location, such as the
glove compartment, console compartment, or under the
dashboard, so that the XM Mini-Tuner can be removed or
replaced. Note also that the cradle must be situated close
enough to comply with the CommanderMT Display Controller
cable and Power Cable lengths (6’).
b. Installing the Mini-Tuner - Install the XM Mini-Tuner in the
cradle by inserting the tuner into the cradle slot until the
cradle and tuner connectors mate together. You will feel the
tuner connector click into place. Fold the plastic retainer cover
over the cradle and press down until the cradle tabs lock into
the the cover side holes. The XM Mini-Tuner is now secured in
place in the cradle.
Good installation practices should be observed when mounting
any component to avoid vibration, movement or rattling after
installation. When routing cables, avoid blocked passages and
any obstructions that could kink, crimp, twist, or chafe the
cables. Components should be secured in place using
methods such as Velcro, double-sided foam tape, etc.
Cable Routing and Component Installation