Audiovox 50-0300A-002 SERIES Car Video System User Manual


  Open as PDF
of 6
 
INSTALLATION INSTRUCTIONS
FOR
50-0300A-014 SERIES 1181282
50-0300A-002 SERIES 1181284
FORD EXPLORER / MERCURY MOUNTAINEER w/ SUNROOF
OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions. Use extreme care when cutting headliner material.
Check for wiring or other componentry above headliner material. Cut only where indicated.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver 2. Powered screwdriver or drill with adapter
3. Awl or similar tool 4. Razor knife or similar tool
5. 18 GA wire 4'-6' 6. 7mm Hex Socket Bit
7. Test Light 8. Audiovox Series 640/650 Video Module
Nov. 8, 1999
Printed in the U.S.A
INSTALLATION INSTRUCTION # 44-0039A
next