Filter
Top Products
CW to adjust the bass response as desired. The
level will be shown on the display panel from a
minimum --10 to a maximum of 10 (00 indicates
flat response). The display will automatically return
to the normal indication 5 seconds after the last
adjustment or when another function is activated.
55
55
5
TREBLE CONTROL
To adjust the treble level, first select the Treble
mode by pressing the PUSH SELECT button
3 so
the TRB indication appears on the display panel.
Within 5 seconds of choosing the Treble mode,
rotate the Volume Level control 2 CCW or CW to
adjust the treble response as desired. The level
will be shown on the display panel from a minimum
of --10 to a maximum of 10 (00 indicates flat
response). The display will automatically return to
the normal indication 5 seconds after the last
adjustment or when another function is activated.
66
66
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
the Balance mode by pressing the PUSH SELECT
button 3 so the BAL indication appears on the
display panel. Within 5 seconds of choosing the
Balance mode, rotate the Volume Level control 2
CCW to adjust the stereo balance to the left channel
speakers, or CW to adjust it to the right channel
speakers. The balance position will be shown on
the display panel from BAL 10L (full left) to BAL 10R
(full right). When the volume level between the left
and right speakers is equal, BAL L=R will be
shown on the display panel. The display will
automatically return to the normal indication 5
seconds after the last adjustment or when another
function is activated.
77
77
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select
the Fader mode by pressing the PUSH SELECT
button
3 so the FAD indication appears on the
display panel. Within 5 seconds of choosing the
Fader mode, rotate the Volume Level control 2
CCW or CW to adjust the front-rear speaker balance
as desired. The fader position will be shown on
the display panel from FAD 10R (full rear) to FAD
10F (full front). When the level between the
front and rear speakers is equal, FAD F=R will
be shown on the display panel. The display
will automatically return to the normal
indication 5 seconds after the last adjustment
or when another function is activated.
88
88
8
LOUDNESS CONTOUR (
BAND/
LOUD)
When listening to music at low volume levels,
this feature will boost the bass and treble
ranges to compensate for the characteristics
of human hearing. Press the
BAND
/LOUD
button for 2 seconds to activate this feature
and the indication LOUD ON will appear on the
display panel for 5 seconds. Pressing the
button again for 2 seconds will deactivate the
feature, and LOUD OFF will appear on the
display panel for 5 seconds.
99
99
9 AUDIO MUTE SELECTOR (MUT)
Press this button momentarily to mute the
volume from the system (MUTE will appear
flashing on the display panel). Pressing this
button again, adjusting the Volume Level
control
2, or pressing any other button, will
return to the volume level setting in use before
the Mute function was activated.
blbl
blbl
bl AM/FM BAND SELECTOR (
BAND/
LOUD)
Each time the
BAND/
LOUD button is pressed,
the radio band is changed. The indications
F1, F2, F3 or AM will appear in the display
panel according to your selection.
bmbm
bmbm
bm AUTOMATIC UP/DOWN TUNING
( / )
To select a radio station in the automatic mode,
momentarily press the Up Tuning
( )
button to advance the unit to the next available
station, or the Down Tuning
( ) button to
tune downward to the next available station.
The radio will automatically seek the next
strongest station. If the Local mode (LOCAL)
is active, the radio will seek the next strongest
local station when either button is pressed.
7
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS