Filter
Top Products
response or clockwise to increase it as
desired. The level will be shown on the
display panel from a minimum BAS -12 to a
maximum of BAS +12 (BAS 00 indicates
flat response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
5 TREBLE CONTROL
To adjust the treble level, first select the
Treble mode by pressing the Select button
3 so the TRE indication appears on the
display panel. Within 5 seconds of choosing
the Treble mode, turn the Level control
2
counter-clockwise to decrease the treble
response or clockwise to increase it as
desired. The level will be shown on the
display panel from a minimum TRE -12 to a
maximum of TRE +12 (TRE 00 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
Select button
3 so the BAL indication
appears on the display panel. Within 5
seconds of choosing the Balance mode, turn
the Level control
2 counter-clockwise to
adjust the stereo balance to the left channel
speakers or clockwise to adjust it to the right
channel speakers. The balance position will
be shown on the display panel from BAL
L16 (full left) to BAL R16 (full right). When
the volume level between the left and right
speakers is equal, BAL 00 will be shown
on the display panel. The display will
automatically return to the normal
indication 5 seconds after the last
adjustment or when another function is
activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the
Select button
3 so the FAD indication
appears on the display panel. Within 5
seconds of choosing the Fader mode, turn
the Level control
2 counter-clockwise to
adjust the front-rear speaker balance to the
rear speakers or clockwise to adjust it to
the front speakers. The fader position will
be shown on the display panel from FAD
R16 (full rear) to FAD F16 (full front). When
the level between the front and rear speakers
is equal, FAD 00 will be shown on the display
panel. The display will automatically return
to the normal indication 5 seconds after the
last adjustment or when another function is
activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press the
button momentarily to activate this feature
and the indication LOUD will appear on the
display panel. Pressing the button again
momentarily will deactivate the feature (the
LOUD indication will disappear from the
display panel).
9 AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the
volume from the system ( MUTE will appear
blinking on the display panel). Pressing the
button again or adjusting the Volume control
2 will return to the volume level setting in
use before the Mute function was activated.
66
66
6
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS