Filter
Top Products
1 ON-OFF POWER BUTTON ( PWR )
Press this button to turn the unit on or off. If
the ignition switch is “on”, the unit will also
turn on automatically when a compact disc is
inserted, or if the MODE switch or BAND
switch is pressed.
2 AUDIO CONTROL UP/DN KNOB
To increase the volume level, turn the knob
clockwise in the UP direction. The volume
will increase and the level will be shown on
the display panel from a minimum of VOL
00 to a maximum of VOL 39. To decrease
the volume level, turn the knob counter-
clockwise in the DN direction. The dis-
play will automatically return to the normal
indication 5 seconds after the last volume
adjustment or when another function is ac-
tivated. This control knob is also used in
conjunction with the AUDIO SELECT (SEL)
button
3 to adjust the bass, treble, bal-
ance and fader levels as described in
4,
5, 6 and 7.
3 AUDIO SELECT (SEL) CONTROL
BUTTON
This button is used to select the audio
function (volume, bass, treble, balance, or
fade) whose setting is adjusted using the
AUDIO CONTROL knob
2. Pressing the
SEL button once will set the unit for bass
adjustment (BAS will appear on the display
panel) and an audible beep will occur.
Pressing the button additional times will
select treble adjustment (TRE on the
display), balance (BAL), or fader (FAD),
each accompanied by a beep tone. The
display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
NOTE: Bass and Treble cannot be adjusted
while the Equalizer function
cu is in
ROCK, CLAS or POP mode.
4 BASS CONTROL
To adjust the bass level (equalizer function
inactive), first select the Bass mode by
pressing the SEL button
3 so the BAS
55
55
5
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS
3, 4, 5, 6, 7
10, 18, 19, 34, 35
ROCK
POP
CLAS
EQ
TRACK
RND SCAN RPT
24
33
9
2
17, 28, 29
(BEHIND PANEL)
14
15 26 27 30
8
25
11
116
32
1220
21
36
22
37
23
38
13
31