Filter
Top Products
treble adjustment (“TRE” on displaypanel), balance
(“BAL”), fader (“FAD”), and volume (“VOL”). The
display will return tothe normal indication 5 seconds
after the last adjustment or when another function is
activated.
4 BASS CONTROL
To adjust the bass level, first select the Bass mode
by pressing the Select button 3 until the “BAS”
indication appears on the display panel. Within 5
seconds of choosing the Bass mode, press the + or
- buttons of the Level Control 2 to adjust the bass
response as desired. The bass level will be shown
by the bars on the display panel from a minimum of
----- to a maximum of ----- (a single bar in the center
of the displayrepresents flat response). The display
will automatically return to the normal indication 5
seconds after the last adjustment or when another
function is activated.
5 TREBLE CONTROL
To adjust the treble level, first select the Treble
mode by pressing the Select button 3 until the
“TRE” indication appears on the display panel.
Within 5 seconds of choosing the Treble mode,
press the + or - buttons of the Level Control 2 to
128-5272
12 of 20
1111
1111
11
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
1 POWER OFF BUTTON
Press this button to turn the unit off. Use the Radio
On/Band Selector button bl or CD Mode Selector
cl to turn the unit on.
2 VOLUME / LEVEL CONTROLS
To increase the volume level, press the + button.
The volume will increase and the level will be
shown bythe bars underthe “VOL” indicationon the
display panel. To increase the volume quickly,
keep the button pressed. To decrease the volume
level, press the - button. Keep the button pressed
to decrease the volume quickly. The display will
automatically return to the normal indication 5
seconds after the last volume adjustment or when
another function is activated. These controls are
also used in conjunction with the Select button 3
to adjust the treble, bass, balance and fader levels
as described in 4 , 5 , 6 , and 7 .
3 SELECT BUTTON (SEL)
This button is used to select the audio function
(volume, bass, treble, balance or fade) to be ad-
justed using the Level Control 2 . Pressing the
Select button once will set the unit for bass adjust-
ment (“BAS” will appear on the display panel).
Pressing the button additional times will select
ACD-32A
1dl3
2
bu
8
ctbq
co
dm
bl
cp
cu9
cl
bn
bm
cn
bp
bs
br
cs
bt
cq
dl
cm
bo
cr