Audiovox ACD-32A Car Stereo System User Manual


 
will appear on the display panel) and only strong
(local) stations will be received during Automatic
Seek Tuning. Pressing the button again will select
the Distant setting (“LOC” will disappear from the
display panel) and the radio will stop at a wider
range of signals, including weaker (more distant)
stations.
During FM radio operation, this button is used to
select mono or stereo reception of the broadcast
signal. Under normal reception conditions, the unit
should be left in the stereo mode, as indicated by
“ST” on the display panel when listening to an FM
stereo signal. If the stereo signal is too weak for
comfortable listening, press the button to switch to
mono reception (the “ST” will disappear from the
display panel and “MONO” will appear). To return
to the stereo reception mode, press the button
again so that the “MONO” indication disappears
and the “ST” indication returns.
bt LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if
subjected to cold temperatures for an e x-
tended period of time, they may take longer
to illuminate than under normal conditions.
In addition, the visibility of the numbers on
the LCD may slightly decrease. The LCD
read-out will return to normal when the
temperature increases to a normal range.
buDISCSLOT
With the label surface facing up, gently insert the
disc into the slot until the soft-loading mechanism
engages and disc play begins. The DISC indica-
tion, track number and elapsed time will appear on
the display panel.
NOTE: This unit is designed for play of standard
5" (12cm) Compact Discs ONLY. Do not
attempt to use 3" (8cm) CD-Singles in this
unit, either with or without an adaptor, as
damage to the player and/or disc can
occur. Such damage will not be covered
by the Warranty on this product.
1313
1313
13
128-5272
14 of 20
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
bq AUTO-STORE TUNING(AS)
PRE-SET SCAN TUNING (PS)
Press this button momentarily to scan the 6 sta-
tions in the pre-set memories of the band in use.
The unit will stop at each pre-set station for 5
seconds before continuing to the next pre-set
station (the pre-set number on the display panel
will flash during Pre-Set Scan operation). Press
the button again momentarily to stop Pre-Set Scan
operation and remain on the selected frequency.
Pressing the button for longer than 2 seconds will
activate the Auto-Store Tuning feature. The radio
will automatically scan the band in use and enter
strong stations into the pre-set memory positions
for that band. If you have already set the pre-set
memories of that band to your favorite stations,
activating the Auto-Store Tuning feature will erase
those stations and enter the new strong stations.
This feature is most useful when travelling in a new
area where you are not familiar with the local
stations.
br STATION PRE-SET MEMORIES
To set any ofthe 6 pre-set memory buttons,use the
following procedure:
1. Turn the unit on and select the desired band.
2. Select the first station to be pre-set using the
ManualUp/Down bm & bnorAutomatic Up/
DownSeek Tuningfunctions bo& bp.
3. Press the pre-set button to be set and continue
to hold the button in. The volume will be
momentarily muted and then return and the
pre-set numberwill appearon thedisplay panel.
The station is now set into the memory of that
pre-set button and can be re-called at any time
by momentarily pressing that button.
4. Repeat the above procedure for the remaining
5 pre-sets on the band in use and for the other
4 bands of the unit.
bs LOCAL/DISTANT -FM STEREO/MONO
SELECTOR (MO/LO)
This button is used to select the strength of the
signals (Local or Distant) at which the radio will
stop during Automatic Seek Tuning on the AM and
FM bands as well as FM Stereo or Mono reception
modes.
Press the button to select the Local setting (“LOC”