Filter
Top Products
cl CD MODE SELECTOR (CD)
Press this button to turn on the unit if a disc is
already loaded in the player.
When listening to radio with a disc loaded in the
unit ( DISC on the display panel), press this button
to return to disc play mode from the point at which
play was stopped.
cm FORWARD TRACKSELECT ( )
cn BACKWARD TRACK SELECT ( )
The Track Select functions are used to quickly
access the beginning of a particular track. Each
time the Forward Track Select ( ) button is
pressed, the next higher track number will be
selected as shown on the display panel. Similarly,
each time the Backward Track Select ( ) button
is pressed, the next lower track number will be
selected as shown on the display panel.
co & cp CUE/REVIEW FUNCTIONS ( / )
High-speed audible search to any section of the
disc can be made by the Cue and Review func-
tions. Press and hold the Cue button ( ) to
advance rapidly in the forward direction or the
Review button ( ) to advance rapidly in the
backward direction. During either function, the
elapsed time within each track will automatically
be shown on the display panel.
cq INTRO-SCAN SELECTOR(INT)
During disc play, press this button to play the first
10 seconds of each track on the disc (“INTRO” will
appear on the display panel). When a desired
track is reached, press the Intro-Scan button cq
again to cancel the function and play of the se-
lected track will continue. Intro-Scan mode will
also becancelled byactivating theRepeat Play cr
or Random Play cs functions.
cr REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the
play of the selected track (“RPT” will appear on the
display panel). Play of the track will continue to
repeat until the button is pressed again and the
“RPT” indicationdisappears fromthe displaypanel.
Repeat Play mode will also be cancelled by acti-
vating the Intro-Scan cq or Random Play cs
functions.
128-5272
15 of 20
1414
1414
14
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
cs RANDOM PLAY SELECTOR (RDM)
During disc play, press this button to playthe tracks
on the disc in a random shuffled order (“RANDM”
will appear on the display panel). In Random Play
mode,the ForwardTrackSelect cm will alsoselect
tracks in the random order instead of the normal
progression. Backward Track Select cn will only
go back to the beginning of the track in play. The
Random Play mode can be cancelled by pressing
the button again (“RANDM” indication will disap-
pear from the display panel) or by activating the
Intro-Scan cq or Repeat Play cr functions.
ct DISC EJECT ( )
Disc play is stopped, the disc is ejected and the unit
will change to radio operation by pressing this
button. If the disc is not removed from the unit
within 10 seconds of being ejected, it will automati-
cally be re-loaded into the unit to prevent damage
( DISC will appear on the display panel). Pressing
the CD Mode Selector button cl again before
removing the disc will also re-load the disc into the
unit.
cu TIME/FREQUENCY DISPLAY SELECTOR
(DISP)
Press this button to call the time display on the
incorporated quartz clock. Press the button again
to return to radio frequency or disc display.
dl THEFT-DETERRENT L.E.D.
Located on the chassis behind the front panel, a
light-emitting diode (L.E.D.) will flash when the
panel is removed. The flashing light serves as a
visual warning to the would-be thief that the unit
has been disabled by removal of the front panel.
dmRE-SETBUTTON
A Re-Set button is located on the front of the
chassis (front panel must be removed to access
the button). The re-set circuitry is provided to
protect the microprocessor circuitry and should
only beactivated underthe followingcircumstances
as it will erase the time and radio station pre-set
memories.
1. Upon initial installation after all wiring is com-
pleted.
2. After the position of the frequency stepswitch on
the bottom of the chassis has been changed.