Filter
Top Products
DISC ID FEATURE
When connected to a compatibleCD changer, the Disc ID feature
incorporatedin thisunitallows youto programanidentifying name
of upto 8 charactersfor upto 110 differentdiscs. The Disc IDmay
be the disc name, artist’s name, music type, or anything else of
your choosing. The Disc ID feature is most useful when trying to
locate a specific disc within the magazine. Instead of waiting for
eachdiscto loadandbeginplayingtofind thedesiredone,youcan
see theDisc IDas theDisc Selectbutton 4 is used. Simplypress
the DiscSelect buttonuntil theDisc IDof thedesired discis shown
on the display panel. That disc will then be automatically loaded
andbeginplaying. ProgramminganduseoftheDiscIDfeatureare
as follows:
PROGRAMMING THE DISC ID
1. SelectCDchanger operationusingthe Play/PauseSelector2.
2. Using theDiscSelectbutton 4,selectthedisc inthemagazine
for which you will be programming the Disc ID name. The
display panel will show the disc number and “LOAD” as the
selected disc is loaded from the magazine into the player.
3. When the disc hasfinished loading andplay hasbegun, press
andholdtheDisplayCallbutton bl for 4secondsuntilaseries
of 8 dashes or cursors (________)appear on the display
panel (the first cursor will be flashing).
4. Within5secondsofthecursorsappearing,usetheTrackSelect
button 5 to find the first character (letters A-Z, numbers
0-9,+,-,*,/,\,>,<,\, and _ (space) are available) of the name
that you wish to program as the Disc ID.
5. When the desired character is found, press the Display Call
button bl so the cursor in the second position is flashing.
6. Inthesamemannerasdescribedinstep4,usetheTrackSelect
button 5 to find the second character for the Disc ID name.
Whenthecharacterisfound,usetheDisplayCall button bl to
move to the third cursor position.
7. Continue the above procedure until the entire Disc ID (up to 8
characters) is programmed for the selected disc.
8. Within 5 seconds of completing the programming of the first
Disc ID (while the cursor or the last programmed character is
still flashing), use the Disc Select button 4 to select the next
disc to have its Disc ID programmed. Use the procedure of
steps 4 through 7 to program the name of the second Disc ID.
9. Continue the above method until names for all discs in the
magazine for which Disc ID’s are to be assigned have been
programmed.
10.Whenfinishednamingthediscsinthemagazine,themagazine
can beejected, a newset ofdiscs loaded intoit, andthen those
discscan haveDiscID’sassignedby repeatingsteps1through
9. This procedure can be repeated until all discs (up to 110)for
which a Disc ID is to be assigned have been programmed.
NOTES ON DISC ID PROGRAMMING
1. You can exit the Disc ID programming mode at any time by
pressing theDisplay Call button bl for 2 seconds orwaiting 5
seconds for the cursor to stop flashing. You can also re-enter
the programming mode at any time during CD changer opera-
5