Filter
Top Products
Iy removed
c. Wiring
1. When routing speaker wires, make sure they are not pinched or cut by any bare
metal edges.
2. Splice the leads from the speakers to the output leads of the tape deck or radio,
making sure to observe and maintain the polarities of the left and right channels.
Cover all exposed wires with electrical insulating tape.
3. When attaching two speakers to one output channel, correct impedance matching
must be maintained. between the speakers and the stereo or radio.
Two 8 OHM speakers wired in parallel: 4 OHMS
Two 4 OHM speakers wired in series: 8 OHMS
Speaker Rating
Loudspeaker:
Impedance
Mounting Applications
5 inch round, 7 oz. magnet
40HMS
Side door panels, rear deck, etc
REAR DECK
SPEAKER INSTALLATION DIAGRAM
1
, --Black screw
3 Screws .-, , t
-..Cabinet A with
Loud speaker
PRINTED IN CHINA