Audiovox UCD200 Car Stereo System User Manual


 
UCD200
8
OPERATING INSTRUCTIONS
Bass Control
To adjust the bass level, first select the Bass
mode by pressing the SEL button (4) until “BA”
appears on the display panel. Within five
seconds, press the AUDIO buttons (3a and 3b)
to adjust the bass response from a minimum of
“B--7” to a maximum of “B 7” (“B 0” represents a
flat response).
Treble Control
To adjust the treble level, press the SEL button
(4) until “TR” appears on the display panel.
Within five seconds, press the AUDIO buttons
(3a and 3b) to adjust the treble from a minimum
of “TR -7” to a maximum of “TR 7”. “TR 0”
represents a flat response.
Left/Right Balance Control
To adjust the left/right speaker balance, press
the SEL button (4) until the “B” indication
appears on the display panel (if not equally
balanced, “BL” or “BR”, followed by the balance
level, will appear). Within five seconds, press
the AUDIO buttons (3a and 3b) to adjust the
balance between the left and right speakers
from “BL 15” (full left) to “BR 15” (full right). “B
00” represents an equal balance level between
the left and right speakers.
Rear/Front Fader Control
To adjust the front/rear speaker balance, press
the SEL button (4) until “F“ appears on the
display panel. Within five seconds, press the
AUDIO buttons (3a and 3b) to adjust the
balance between the rear and front speakers
from “FR 15” (full rear) to “FF 15” (full front). “F
00” represents an equal balance level between
the rear and front speakers.
AM/FM Band Selector (BAND)
During radio play, each time the BAND button
(5) is pressed, the radio band changes. The
indications “AM 1”, “AM 2”, ” FM 1”, “FM 2”, or
“FM 3” will appear on the display panel
according to your selection.
Loudness Control (LOU)
When listening to music at low volume levels,
this feature will boost the bass and treble
ranges to compensate for the characteristics of
human hearing. Press the LOU button (6) to
activate this feature as indicated by a beep tone
and “LOUD” appearing on the display panel.
(“LOUD” remains on the display.) Pressing the
button again will sound a beep tone and
“LOUD” will disappear from the display.
4
4
4
4
5
6
AMS
MODE
2SCN
3RPT
4RDM
RELEASE EJECT
MON
SEL
MUT
EQ LOU
DISP
BAND
TUNE
TRACK
AUDIO
5
6
/
UCD200
AM/FM/CD RECEIVER
1
PWR
4
3b
3a
6
5