Filter
Top Products
UCD300/UMP400
12
CD PLAYER OPERATING INSTRUCTIONS
Track Repeat Play Select
(RPT)
During disc play, press the 3 RPT button (18) to
repeat play of the selected track (“S-RPT” will
appear on the display panel). Play of the track
will continue to repeat until 3 RPT is pressed
again and the “S-RPT” indication disappears
from the display panel. Repeat Play mode can
also be canceled by activating the Track Scan
(17) or Random Play (19) functions.
Random Play Select (SHF)
During disc play, press the 4 SHF button (19) to
play the tracks on the disc in a random, shuffled
order (“S-SHF” will appear on the display
panel). In Random Play mode, you can press
the TUNE/TRACK buttons (6a and 6b) to select
tracks in a random order instead of the normal
progression. Press 4 SHF again to cancel
Random Play mode. Random Play mode can
also be canceled by activating the Repeat Play
(18) or Track Scan (17) functions.
Mode Selector (MODE)
Press the MODE button (14) to change
between CD player and radio operation. The
current mode is indicated on the display panel.
During CD player operation, this button may be
used to change to radio without ejecting the
disc (the CD icon ( ) will remain on the
display to show that a disc is still loaded).
Press MODE again to return to CD player
mode.
Disc Eject Button
When the disc eject button (20) is pressed,
disc play is stopped, the disc is ejected, and the
unit will change to radio operation. If the disc is
not removed from the unit within 15 seconds,
the disc will be re-loaded.
NOTE: To prevent a disc from accidentally
being damaged, always remove the disc
from the unit when disc play is finished.
18
19
14 20
AS/PS MODE
2SCN
3RPT
4SHF
RELEASE EJECT
PWR
LOC
SEL
MUT
EQ
MON
DSP
BAND
TUNE
TRACK
LOUD
5CD-
6CD+
/
UCD300
AM/FM/CD RECEIVER
1
PAU
>>
>
19
6b
6a
20
18
14