Filter
Top Products
UMP8015
5
342
15
6
ULTRASERIES
AM/FM / CD/MP3/WMA/ CASSETTERECEIVER
UMP8015
/
LOUD/ENTER
PAU
SCN
RPT
SHF
CD-
CD+
AMS
D-AUD
SCAN MUTE
0
7
WMA
3 in 1 CD/MP3/WMA CASSETTE RECEIVER
8
9
OPERATING INSTRUCTIONS
Power On/Off Button
Press the POWER button (1) to turn the unit on
and off when the vehicle ignition switch is on. If
the radio is off when the ignition switch is turned
off, the POWER button must be pressed to turn
the radio on after the ignition switch is turned
on. If the ignition switch is turned off while the
radio is on, the radio will come on automatically
when the ignition switch is again turned on.
Liquid Crystal Display Panel
The Liquid Crystal Display (LCD) panel displays
the frequency, time and all activated functions.
The display contains a color-coded graph that
provides a visual representation of the signal
level, represented by the number and amplitude
of the segments.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when
the temperature inside the vehicle increases
to a normal range.
Volume Control
To increase or decrease the volume level, turn
the PUSH SELECT control (3). The volume will
increase/decrease and the level will be shown
on the display panel from a minimum of “00” to
a maximum of “100”. The display automatically
returns to the normal indication 5 seconds after
the last volume adjustment or when another
function is activated. This knob is also used to
adjust the bass, treble, balance and fader
levels.
Audio Control (PUSH SELECT)
Press the PUSH SELECT button (3) twice to
set the unit for bass adjustment (“BAS” and the
setting number will momentarily appear on the
display panel). Press the button additional
times to select treble (TRB), balance (BAL),
fader (FAD), and volume (VOL). The display
returns to the normal indication 5 seconds after
the last adjustment or when another function is
activated. Turn the PUSH SELECT knob to
adjust the levels.
1
2
3 3
1
3
2