Filter
Top Products
iNUKE Series power ampliers
pack massive amounts of
output power into exceptionally
lightweight, rack-mountable packages.
Our revolutionary high-density Class-D
technology combined with ultra-ecient
switch-mode power supplies ensures
these feather-light powerhouses will
drive your rig eortlessly for many
years to come.
Superb transient response
We spent years ne-tuning the
high-density Class-D technology that
gives the iNUKE Series its oomph.
By carefully selecting transistors with
extremely high slew rates and optimizing
other proprietary parts of our circuitry,
these amps react instantly to even the
most demanding electronicbass impulses.
When this amazing amplier
technology is combined with our
state-of-the-art switching-mode power
supplies, these ampliers provide
tremendous punch. And because they are
so much more ecient than conventional
designs, they run cooler and don’t require
the massive heat sinks and heavy toroid
transformers typically associated with
their conventional counterparts.
Sublimely simple operation
The front panel controls and indicators
provide your system’s vital signs at a
glance. After pressing the Power button,
the Power LED lights to show the amp
is ready for action. All channels feature
positive-detent Gain controls with Signal
LEDs that light when a signal is present,
as well as clip LEDs to indicate when the
signal is distorted and you need to reduce
the input signal.
iNUKE NU6000DSP—
Ultra-Lightweight, High-Density
6000-Watt Power Amplier with
DSP Control and USB Interface
Delivers 2 x 3000 Watts into 4 Ohms,
2 x 1500 Watts into 8 Ohms and
weighs less than 12 lbs / 5.5 kg
iNUKE NU3000DSP—
Ultra-Lightweight, High-Density
3000-Watt Power Amplier with
DSP Control and USB Interface
Delivers 2 x 1500 Watts into 2 Ohms;
2 x 880 Watts into 4 Ohms;
3000 Watts into 4 Ohms
(bridge mode) and weighs less
than 8 lbs / 3.5 kg
iNUKE NU1000DSP —
Ultra-Lightweight, High-Density
1000-Watt Power Amplier with DSP
Control and USB Interface
Delivers 2 x 500 Watts into 2 Ohms;
2 x 300 Watts into 4 Ohms;
1000 Watts into 4 Ohms
(bridge mode) and weighs less
than 8 lbs / 3.5 kg
Common features
Ultimate reliability through
revolutionary cool-running
High-Density Class-D technology
with “near-zero” thermal buildup
Ultra-ecient switch-mode power
supply for noise-free audio,
superior transient response and
low power consumption
High-performance DSP and
24-bit/96 kHz converters deliver
ultimate signal integrity and
extreme dynamic range
DSP section features sophisticated
delay, crossover (3 lter types, up to
48 dB/octave), EQ (8 parametric,
2 dynamic), dynamics processing
and lockable security settings
Continued on next page
iNUKE NU6000DSP
NU3000DSP/NU1000DSP
NU6000/NU3000/NU1000
PA Ampliers