Bogen VRS1 Car Speaker User Manual


  Open as PDF
of 1
 
VANDAL-RESISTANT SPEAKER MODEL VRS1
DESCRIPTION
The Bogen VRS1 is a wall-mountable, vandal-resistant speaker with call-button designed for use with Bogen Multicom and Multi-
Graphic communication systems. It consists of an 8-ohm loudspeaker, 25V transformer (tapped at 1/2 watt), and call-in switch
mounted to a heavy-gauge stainless steel plate.The call-in switch can be wired to provide either momentary or latching opera-
tion.The plate may be mounted to a 2-1/2" deep Gang Box (4-1/2"W x 6-13/16"H), such as Steel City (H2BD-3/4 &1), with one-
way security screws.
INSTALLATION
A shielded-pair plus one-conductor cable is required.The unshielded conductor should be in a jacketed cable with the shielded
pair, as in West Penn #358 or Belden #8724. Use the chart below to connect the cable to the speaker. Refer to the appropriate
system installation instructions to terminate the cable at the system control center.
VRS1 Wire Color Conductor
White Unshielded conductor (in Multicom and other “momentary” systems)
Red Unshielded conductor (in Multi-Graphic,ACD, and other “latching” systems)
Blue Cable shield
Black Shielded conductor
Yellow Shielded conductor
B74-6377-01
50 Spring Street,Ramsey, NJ 07446,U.S.A.
Tel. 201-934-8500; Fax:201-934-9832; www.bogen.com
Part No.54-5921-01R2
Printed in Korea 0109
Specifications subject to changes without notice.
VRS1 Schematic Diagram