Bush Hog 2012 Brush Cutter User Manual


 


 








SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 21


 11 ft 9 inches
 (width x length)
12 ft 2 inches x 10 ft (Lift), 12 ft 2 inches x 13 ft 4 inches (Pull)

3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount, Cat.II & III

2 inches

2 to 12 inches
 10 gauge

7 gauge /10 inches deep

60 PTO (Pull), 70 PTO (Lift)

ASAE Category 4
 Rubber Element
 120 Main and 90 Outboard
 540/1000 RPM
 4 Plate PTO Slip Clutch
 Choice of Manual Height Bundle or Hydraulic Cylinder
 Round Pans

1/2
x 4 inches - Corner Uplift

15,490 FPM/540 RPM; 15,422 FPM/1000 RPM

Laminated Tire on Lift and Semi-Mount Models, Laminated Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tire on Pull Type Only
 Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
 Front Belting and Rear Bands (Chains Optional)
 Standard for Pull Models
 2184 lbs (Lift), 2267 lbs (Pull), 2079 lbs (Semi-Mount)
 Single Row Chain Deflector Front and Rear
 1 year limited warranty with a 5 year gearbox limited warranty
 Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields