Filter
Top Products
CHAPTER
9-1
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
9
Service/Subscriber Provisioning
The Cisco 6400 Service Connection Manager (SCM) allows you to make and manage network
connections through a set of menu options available by right clicking on an appropriate
Cisco 6400 Chassis, NSP, NRP, NLC, or port object in MapViewer window. These menu options allow
you to create and configure services and subscribers, and to manage the subsequent connection of the
subscribers to the services. Figure 9-1 describes the basic workflow for service and subscriber
provisioning.
This chapter details the tasks you need to use during day to day service connection management and the
name we use to describe combined service and subscriber provisioning.
Figure 9-1 Service/Subscriber Provisioning Workflow
Subscriber
Provisioning
Create a subscriber to connect to a service
instance (created earlier). Configure the subscribers
information. Connect the subscriber to one or more
service instances using a connection template.
Create
Service Profiles
Create/Configure
and Commission
Service Instances
Apply an existing
Service Profile to a
Service Instance
Create/Configure
Connection
Templates
Apply a profile (optional) and then configure the
remaining parameters manually or configure all of the
parameters manually. Some manual configuration is
always required (for example, uplink VPI/VCI). Click
the Commission Service button to "roll" the selected
service configuration onto the 6400 UAC hardware.
Service profiles allow you to configure and save
some or all of the configuration information for a
service instance. You can then later apply the profile
to many service instances.
Defining Policies for
Service and Subscriber
Provisioning
Service
Provisioning
Connection templates allow you to set the Quality of
Service (QoS) parameters for the connection
between the Cisco 6400 UAC and the subscriber.
41809