Filter
Top Products
102
3. Changing the search result route
Navigation guidance
Adding a destination
After setting a destination, up to 5 more destinations can be set.
In the following situations, set an additional destination.
● When setting a transit point between the present location and set destination.
● When changing the set destination into a transit point and setting a new destination.
Using the same method as for setting a destination, touch to add a new destination.
(
See "Setting by directly moving the map" on page 89, "Set from a registered point" on page
91 and
"Set using a map retrieval method" on page 92).
Touch .
Touch for Destination.
Select the map retrieval method to
display the map on which a
destination is to be set.
● "Map retrieval methods" and
"
Performing operations on a retrieved
map
" (page 48, 85).
Add to
Route
Add
●Destinations can be set using detailed maps with a reduction scale under 0.5
miles.
●Geographical points on maps representing set destinations are automatically
registered (up to 100 points) and can be used to retrieve a map when setting a
destination. After exceeding 100 points, the oldest entry is deleted every time a
new one is entered. Unnecessary points can be deleted. (Refer to the Section
"Deleting destination archives" on page 162.)
●If stops along the way are set, they could be deleted from the route when you
add a new destination, depending on the location of the points involved.
●When 2 or more destinations are set, appears.
Reorder