Filter
Top Products
Navigation guidance
129
Navigation
guidance
6. Performing operations on the guided route
Redisplaying the all-route display
The all-route display from the start point to the destination can be shown.
Touch when a map is
displayed on the screen.
Touch
.
● The all-route display screen appears.
● Refer to the Section "All-route display
and touch switches" on page 94 for
details of the all-route display screen.
● Touch to display the present
location screen.
Switching the required time/remaining distance
If 2 or more destinations are set on the present location screen (if the present location is along
the set route), the required time/remaining distance can be switched while route guidance is in
progress.
Touch the required time/remaining
distance switch.
● If two destinations are set, touch the
required time/remaining distance
switch to switch between them.
● If 2 or more destinations are set, the
required time/remaining distance for
each destination appears.
● Switching is impossible if you have
deviated from the set route.
Touch the distance remaining
display up to the preferred
destination.
Map view
Route overview
Back
Required time/Remaining distance display