Focal SOLID 1 Car Amplifier User Manual


  Open as PDF
of 1
 
Specications
Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l’Avenir - 42353 La Talaudière cedex
France - Tél. (33) 04 77 43 57 00 - Fax (33) 04 77 37 65 87 - www.focal-fr.com - SCBD081505/1
Preliminary specifications
SOLID 1
Subwoofer classe AB power amplifier
• Mono amplier
• Remote control
• High and low level inputs
Mechanical Drawing
Nominal power measured at
14.4V continuously @ 4Ω
1 x 300 W
Nominal power measured at
14.4V continuously @ 2Ω
1 x 470 W
Power in bridge mode
measured at 14.4V
continuously @ 4Ω
-
Signal/noise ratio > 85dB (A)
Damping factor at 4Ω
50 to 50Hz
Frequency response (-1dB) 10 Hz – 150Hz
Input impedance 20kΩ
Input sensitivity 0.2 – 5V
Input sensitivity high level 0.4 – 9Vrms
High-pass crossover
(1/2 and 3/4 channels)
-
Low-pass crossover
(sub channel)
50 – 150Hz (12 dB/oct.)
Remote control (sub channel) YES
Adjustable bass boost level 0 to +9dB at 50Hz
Variable phase (SUB) 0 or 180°
Subsonic lter 35Hz (24dB/oct)
Maximum cross section of
loudspeaker cables
10mm
2
7 AWG
Maximum cross section of
power cables
35mm
2
2 AWG
Protections Short-circuit
Thermal overload
Overvoltage
Polarity reversal
Dimensions (HxWxD)
1
3/4
x 11
13/16
x 7
7/8
”
(45 x 300 x 200mm)
THD / Power
Audio Precision
POWER vs THD@4ohm
0.003
10
0.005
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
%
1
500
2
5
10
20
50
100 200
W
T
FOCAL
dx=30.23 W