Insignia NS-24E40SNA14 Car Satellite TV System User Manual


 
CABLE
QUICK
SETUP GUIDE
24" LED TV
NS-24E40SNA14
Included accessories
Remote control
and two AAA batteries
TV stand
M4 screws
(12 mm length) (8 pcs.)
Note: Images do not necessarily represent the exact design of your television.
Features
Front view
Back view
OVER
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
STOP!
Do not plug your
power adapter in until
all other devices have
been connected.
Multi-purpose jacks: You can plug
any device that uses HDMI into
either of the HDMI jacks. However,
certain devices must be connected to
HDMI1/DVI or HDMI2/ARC. See the
instructions that came with your ARC
or DVI device for more information.
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest using
HDMI if your device supports it.
Note: Connect the yellow video
cable to the green Y/VIDEO jack on
the back of your TV.
Using an HDMI cable (BEST)
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
How do I connect my TV to an antenna or cable wall jack?
Power connector
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) and/or connect a device such as
a DVD or Blu-ray Disc player, game station, or camcorder?
A
Before using your new product, please read these instructions to prevent any damage.
Remote control sensor
Power indicator
NS-RC6NA-14
H
O
M
E
ASPECT
Power adapter
Stand column
USB
DIGITAL OUTPUT
(COAXIAL)
USB HDMI2 / ARCHDMI1 / DVI
IN
PC / DVI
AUDIO IN
VGA
VIDEO / Y P
B PR
ANT / CABLE IN
PC INAV / COMPONENT INPOWER IN
DC 12V
LRAUDIO
PC / DVI
AUDIO IN
VGA
VIDEO / Y P
B PR
ANT / CABLE IN
PC INAV / COMPONENT INPOWER IN
DC 12V
LRAUDIO
USB
DIGITAL OUTPUT
(COAXIAL)
USB HDMI2 / ARCHDMI1 / DVI
IN
M4 screws (12 mm)
C
M4 screws (12 mm)
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
- OR -
How do I prepare my TV for wall mounting? (not for use with a TV stand)
You’ll need: A soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
B Attach the wall-mount bracket to your TV using the mounting holes on the
back of your TV. See the instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
B Attach the stand column to the TV using the four of the provided M4 screws.
C Attach the stand to the stand column using the four of the provided M4 screws.
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can use the HDMI 1/DVI jack to connect a DVI device to your TV. Attach an
HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack. See your online User Guide for more information about dierent types of
HDMI (ARC, DVI).
PC / DVI
AUDIO IN
VGA
VIDEO / Y P
B PR
ANT / CABLE IN
PC INAV / COMPONENT INPOWER IN
DC 12V
LRAUDIO
Component cable option
AV cable option
AUDI O
/
VIDEO
OUT
AUDIO/VIDEO OUT
B
AUDIO OUT
AUDIO OUT
C
M
Y
CM
MY
CY
CMY
K
NS-24E40SNA14_13-0490_QSG_V3_ENG_Final.eps 1 7/22/2013 3:47:31 PMNS-24E40SNA14_13-0490_QSG_V3_ENG_Final.eps 1 7/22/2013 3:47:31 PM