Open as PDF
Note: Images do not necessarily represent the exact design of your television.
Component video and analog audio
Composite video and analog audio
JACK TYPE CABLE CONNECTOR
Do not plug your
power cord in until all
other devices have
You can plug any
device that uses HDMI into either of
the HDMI jacks. However, certain
devices must be connected to the
ARC or DVI jacks. See the instructions
that came with your ARC or DVI
device for more information.
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest using
HDMI if your device supports it.
How do I connect my TV to an antenna or cable wall jack?
Remote control and
two AAA batteries
(20 mm length) (4 pcs)
Component cable option
AV cable option
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can use the HDMI 2/DVI jack to connect a DVI device to your TV. Attach an
HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack. See your online User Guide for more information about dierent types of
HDMI (ARC, DVI).
Note: Connect the yellow video
cable to the green Y/VIDEO jack
on the back of your TV.
Before using your new product, please read these instructions to prevent any damage.
Using an HDMI cable (BEST)
How do I watch TV (cable or satellite receiver) or connect a device such as a
DVD or Blu-ray Disc player, game station, or camcorder?
Using component cables (BETTER)
- OR -
Using an AV cable (GOOD)
Remote control sensor
50" LED TV
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
- OR -
How do I prepare my TV for wall mounting? (not for use with a TV stand)
• Carefully place your TV face-down on a cushioned, clean surface to protect the screen from
damages and scratches.
A Remove the ve screws that secure the stand column to the TV.
B Remove the stand column.
See the instructions that came with your wall mount for more information about how to
correctly mount your TV.
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
B Find the front of the TV stand, then secure the TV stand to the stand column
using the four provided screws.
M4 screws (20 mm)