Filter
Top Products
55
NS-55D550NA15 Insignia 55" LED TV
www.insigniaproducts.com
Adjust the sound
Adjust sound settings
You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight AUDIO, then press
T
or
ENTER. The AUDIO menu opens.
3 Press
S
or
T
to highlight an option, then press
ENTER to access the option. You can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Music—Preserves the original sound. This
setting is good for listening to music.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Custom—Lets you manually adjust sound
settings.
• Balance—Adjusts the balance between the
left and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV audio.
When you connect headphones to your TV,
audio plays through both the headphones
and the TV speakers. You can select:
• Auto (default setting)—Automatically
turns off the TV speakers when you
connect a device to the /AUDIO OUT
jack. When the device is disconnected, the
TV speakers turn on automatically.
• On—Always plays the audio through the
TV speakers. If a device is connected to the
/AUDIO OUT jack, the audio is played
through both the TV speakers and the
device.
• Off—Turns off the TV speakers and plays
the audio only through the device
connected to the /AUDIO OUT jack. If
you disconnect the device, the TV speakers
remain turned off.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select:
• RAW (to pass through the original digital
audio sound).
• PCM (to output audio in 2-channel stereo).
• Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language Default—(Digital channels
only) Selects an alternate audio language, if
available.
• Headphones/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, a home theater system,
or a sound bar. When a device is connected to
the /AUDIO OUT jack, the TV speakers are
muted. You can select:
• Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from the headphones,
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack.
• Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack to control the
audio.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.