Insignia NS-55D550NA15 Car Satellite TV System User Manual


 
56
Insignia 55" LED TV
www.insigniaproducts.com
Select the audio out mode
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, a home theater system,
sound bar, or external speaker system to the
/AUDIO OUT jack on the side of your TV. The
following screen opens.
2 Press
W
or
X
to highlight the audio out mode
you want to use, then press ENTER. You can
select:
Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from the headphones,
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack.
Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack to control the
audio.
Play TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Audio Only, then
press ENTER.
4 Press
S
or
T
to select On.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
The picture turns off in about five
seconds.
Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.