Insignia VS32D420NA16 Car Satellite TV System User Manual


 
DC IN
(12V)
ANT/CABLE
IN
L R
- AUDIO -
AV IN
COMPONENT IN
VIDEO / Y PB PR
Your TV has four VESA mounting holes on the back. If you attach a wall-mount
bracket to the back of your TV, the bracket must be securely attached,
using all four holes. If you do not use all four mounting holes, your TV may
fall and cause property damage or personal injury. See the documentation
that came with your wall mount for complete mounting instructions.
Quick Setup Guide
|
NS-32D420NA16
32" FHD 60Hz • DLED TV
2
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player, game console, or tablet?
FEATURES
1
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: Soft surface and Phillips screwdriver
WALL MOUNT
How do I prepare my TV for wall mounting? (not for use with a TV stand)
You’ll need: Soft surface and Phillips screwdriver
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then
click Support & Service. Enter
NS-32D420NA16 in the box under
Manual, Firmware, Drivers & Product
Information, then click .
STOP
Do not plug your power cord in until all
other devices have been connected.
!
B Align the screw holes on the TV stands with the
holes on the back of your TV, then secure each
stand to your TV with two of the provided
screws.
Before using your new product, please read these
instructions to prevent any damage.
INCLUDED ACCESSORIES
Remote control and
two AAA batteries
TV stands
M4 screws (14 mm length) (4 pcs.)
Power adapter
AAA
+
AAA
+
A
AUDIO/VIDEO OUT
AUDIO/VIDEO OUT
CABLE
WHICH CABLES
DO YOU HAVE?
OR
OR
Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack.
However, certain devices must be connected to the ARC jack. See the instructions
that came with your ARC device for more information.
Note: Connect the yellow
video cable to the
green VIDEO/Y jack.
HDMI (BEST)
Best video quality
COMPONENT
BETTER
AV (GOOD)
COAXIAL
GOOD
Power indicator
Remote control sensor
Note: The component and AV jacks are shared. This means you can connect
only one component or AV device at a time. We suggest upgrading to HDMI
(BEST) if your device supports it.
A Carefully place your TV face-down on a
cushioned, clean surface.
B See the instructions that came with your wall mount for more information
about how to correctly mount your TV.
A
A Carefully place your TV face-down on a cushioned,
clean surface.
B
Front
Note: Images do not necessarily represent the exact design of your television.
M4 screws (14 mm length)
DC IN
(12V)
ANT/CABLE
IN
L R
- AUDIO -
AV IN
COMPONENT IN
VIDEO / Y PB PR
AUDIO
OUT
HDMI 2
FACTORY
USE
ONLY
HDMI 1
(ARC)
(OPTICAL)
DIGITAL
OUTPUT
USB
DC IN
(12V)
ANT/CABLE
IN
L R
- AUDIO -
AV IN
COMPONENT IN
VIDEO / Y PB PR
HDMI 2 HDMI 1
(ARC)