Filter
Top Products
UV8035
16
CD/DVD OPERATION
Insert Disc (OPEN)
Press the OPEN button (8) to open the front
panel and reveal the disc slot. With the label
surface facing up, gently insert the disc into the
slot until the soft-loading mechanism engages
and disc play begins. The front panel will close
automatically and “Reading...” will appear on
the screen while the disc loads.
NOTE: The unit is designed for play of
standard 5” (12 cm.) compact discs only. Do
not attempt to use 3” (8 cm.) CD singles in
this unit, either with or without an adaptor,
as damage to the player and/or the disc may
occur. Such damage will not be covered by
the warranty on this product.
Eject Disc (OPEN)
When the OPEN button (8) is pressed while a
disc is inserted, disc play is stopped and the
disc is ejected. The unit will revert to Tuner
operation. If the disc is not removed from the
unit within 15 seconds, the disc will be re-
loaded.
NOTE: To prevent a disc from accidentally
being damaged, always remove the disc
from the unit when disc play is finished.
Controlling Playback
After inserting an audio disc, the player
automatically plays the first track. The elapsed
playing time is displayed in the right corner.
When the track is finished, the next track will
play automatically. Press the 2/STOP button
(11) to stop playback of the current file. The
MP3 user interface is shown below:
• Use the , , or buttons on the
remote control to navigate the on-screen
file list.
• Press the button on the remote control
or the 5> button (14) on the control panel
when the highlighted file is in the column on
the far right to display the next ten files.
• Press the button on the remote control
or the 6< button (6) on the control panel
when the highlighted file is in the column to
the far left to display the previous ten files.
• Press OK when a file number is highlighted
or after numeric input to begin playback of
the selected file.
• Use the remote control numeric buttons (0-
9, +10) to enter and play a file number
directly. Press the +10 button repeatedly to
select a number in the tens position for
direct track entry (for example, to select
track “44”, press the +10 button four times
and then press the 4 button).
Disc Play/Pause
Press the 1/PAUSE button (10) to freeze disc
play. Press 1/PAUSE again to resume disc play.
Disc Stop
Press the 2/STOP button (11) to stop disc play
and retain the playback position (DVD, VCD,
CD). Press 2/STOP twice if you want to resume
playback from the beginning of the disc. Press
1/PAUSE to resume disc play.
NOTE: After the last track on a disc is
played, the unit will stop playback. Press 1/
PAUSE to play from the beginning of the
disc.