JVC KD-HDR60 Car Speaker User Manual


 
ENGLISH
10
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
While listening to an HD Radio station...
Select “TUNER=BLEND HOLD
=AUTO/DIGITAL/ANALOG
If no sound can be heard with “AUTO,” change the
setting to “ANALOG” or “DIGITAL.”
The setting automatically returns to “AUTO” in the
following cases:
– When you tune in to another broadcast.
– When you change to another source.
– When you turn off the power.
This setting cannot take effect for the conventional
FM/AM stations.
If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
Lights up when holding the digital reception.
Flashes when holding the analog reception.
[Turn] = [Press]
Repeat this procedure.
[Hold]
The SET menu is called up.
Searching for HD Radio stations
only
When a station is tuned in, searching stops.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1 Call up the SET menu.
2 Select TUNER.”
3 Select MONO.”
4 Select MONO ON.”
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure to select “MONO OFF.”
[Hold]
[Hold]
[Turn] = [Press]
[Turn] = [Press]
[Turn] = [Press]
KD-HDR60[J].indb 10KD-HDR60[J].indb 10 09.11.24 11:21:55 AM09.11.24 11:21:55 AM