JVC KD-S30 Car Stereo System User Manual


 
21
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Sound cannot be heard
from the speakers.
The unit does not work
at all.
SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
Static noise while
listening to the radio.
CD cannot be played
back.
CD-R/CD-RW cannot be
played back.
Tracks on the CD-R/
CD-RW cannot be
skipped.
CD cannot be ejected.
CD sound is sometimes
interrupted.
“NO DISC” appears on
the display.
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
Store stations manually.
Connect the antenna firmly.
Insert the CD correctly.
Insert a finalized CD-R/
CD-RW.
Finalize the CD-R/CD-RW
with the component which you
used for recording.
Unlock the CD. (See page 15.)
Stop playback while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading slot.
Insert the CD correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Signals are too weak.
The antenna is not connected
firmly.
CD is inserted upside down.
CD-R/CD-RW is not finalized.
CD is locked.
You are driving on rough roads.
CD is scratched.
Connections are incorrect.
No CD in the loading slot.
CD is inserted incorrectly.
General
CD Playback
FM/AM
EN21-23_KD-S30[J]f.p65 28/10/03, 3:05 PM21