Kenwood DDX8034BTM Car Satellite TV System User Manual


 
English 73
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
Display the Speaker Select screen1
Touch [ ] > [ ] > [Audio SETUP] >
[Speaker Select]. (page 59)
Select a speaker you wish to adjust2
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
2
2
2
1
1
1
3
3
3
4
4
4
1
Center speaker
2
Front speaker
3
Rear speaker
4
Subwoofer
[Tweeter] You can set the tweeter when you
are selecting front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
Select a speaker type3
You can select any of the following speaker
types.
"Center" NONE, 40x70 mm, 5 cm, 10 cm,
13 cm, 16 cm over
"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" NONE, 16 cm, 20 cm, 25 cm,
30 cm, 38 cm over
Select "NONE" if you have no speakers.
If you set the center speaker to "NONE" even in a short
time when you are setting the Surround Control (page
57) to "Bypass+Center", the Surround Control is set to
"Bypass" automatically.
If you set the center and rear speakers to "NONE"
when you are setting the Surround Control (page 57)
to "Dolby PL II", the Surround Control is set to "Bypass"
automatically.
Next page 3