Kenwood DPX308U Car Satellite TV System User Manual


 
14
|
Quick Start Guide
Removing the Unit
Removing the hard rubber frame
Engage the catch pins on the removal
tool 4 and remove the two locks on the
lower level.
Lower the frame and pull it forward as
shown in the figure.
Catch
Lock
Removal tool (Accessory
4)
• The frame can be removed from the top
side in the same manner.
When the lower level is removed, remove
the upper two locations.
Removing the Unit
Remove the hard rubber frame by
referring to the removal procedure in
the section <Removing the Hard Rubber
Frame>.
Insert the two removal tools 4 deeply
into the slots on each side, as shown.
Lower the removal tool toward the
bottom, and pull out the unit halfway
while pressing towards the inside.
¤
Be careful to avoid injury from the catch
pins on the removal tool.
Pull the unit all the way out with your
hands, being careful not to drop it.
B59-2069-00_00_2DIN_K_QSG.indb 14 11/01/19 16:46