Kenwood KDC-MP728 Car Stereo System User Manual


 
English
|
23
• *
1
If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
• *
2
Function of the KDC-X889/MP828/X789
• Auxiliary input name is displayed for the Auxiliary
input source.
• If the text for the Sirius tuner source, including
Channel name, etc. is selected when the channel
which does not have text for the Sirius tuner source,
including Channel name, etc. is played, band &
channel number is displayed.
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
• File number at Audio file displays the last 3 digits
when it exceeds 1000 songs (KDC-X889/MP828/X789
only).
• Album name cannot be displayed in WMA file. (KDC-
MP7028/MP728/MP628 only)
• Song title, Artist name, and Album name cannot be
displayed in AAC file. (KDC-MP7028/MP728/MP628
only)
Display Type C/ Display Type D
Text Display Switching
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
2 Enter display control mode
Press the [6]/[2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
4 Select the display Type
Push the Control knob to [4] or [¢].
Select the "Display Type C"/"Display Type D"
display.
5 Enter text select mode
Press the [2] ("TEXT") button.
6 Select the text display part
Push the Control knob to [FM] or [AM].
The cursor ( ) moves to the selected text display
part.
Select the text
Push the Control knob to [4] or [¢].
Refer to the table described later for setting
items.
7 Exit Display Control mode
Press the [6] ("RTN") button.
• The information displayed in Upper text display part,
Middle text display part and Lower text display part
can be switched when "Display Type C" is selected.
• The information displayed in Upper text display part
and Lower text display part can be switched when
"Display Type D" is selected.
• Same information cannot be displayed in Upper text
display part, Middle text display part and Lower text
display part. However, the blank display is able to have
multiple selections.
• KDC-X789 doesn't display the Spectrum analyzer.
• Album name cannot be displayed in WMA file. (KDC-
MP7028/MP728/MP628 only)
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
• Song title, Artist name, and Album name cannot be
displayed in AAC file. (KDC-MP7028/MP728/MP628
only)
• If the text for the Sirius tuner source, including
Channel name, etc. is selected when the channel
which does not have text for the Sirius tuner source,
including Channel name, etc. is played, band &
channel number is displayed.