Filter
Top Products
English
|
35
⁄
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Select the number dial mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Number Dial”.
3
Enter a phone number
Operation type Operation
Select the numbers. Turn the [Volume] knob.
Move to the next digit. Press the [
¢
] button.
Delete the last digit. Press the [
4
] button.
• Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
✍ To erase the entered phone number digit
by digit:
Press the [4] button on the remote
controller.
4
Make a call
• Press the [Volume] knob.
• Press the [DIRECT] button on the remote
controller.
⁄
• You can input max 25 (KIV-BT901)/ 32 (KIV-701) digits.
Make a Voice Dialing Call
1
Enter voice recognition mode
KIV-BT901:
1. Press the [ ] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Voice Recognize”.
KIV-701: Press the [VOL] button for at least 1
second.
2
“Phonebook Name?” is displayed.
When a beep is heard, say the name within 2
seconds.
3
“Phonebook Type?” is displayed.
When a beep is heard, say the category name
within 2 seconds.
4
Make a call
Press the [Volume] knob.
✍ This step is the same as step 4 of the procedure
in <Calling a Number in the Phone Book> (page
34). You can make a call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [Volume] knob allows you to retry
voice input. Refer to <Troubleshooting Guide> (page 84).
• Both the name and category require registration of
a voice tag. Refer to <Setting a Voice Command for
Category> (page 60).
• Audio sound is not output during voice recognition.