Kenwood KIV-BT901 Car Satellite TV System User Manual


 
LR
L
R
REMOTE CONT.
REMOTE INPUT
STEERING WHEEL
P.CONT
ILLUMI
ANT.
CONT
MUTE
iPod
IN
PRK SWREVERSE
MIC
iPod
AUDIO OUT
iPod
VIDEO OUT
REAR VIEW
CAMERA
80
|
KIV-BT901/ KIV-701
Connecting Wires to Terminals
FM/AM antenna input (JASO)
Antenna Cord
Wiring harness (Accessory 1)
To Kenwood disc changer/External optional
accessory
To connect these leads, refer to the
relevant instruction manuals.
Fuse (10A)
Front output
Rear output
Sub Woofer output
USB connector
(1m (3.2 ft))
Do not remove the cap when you do
not use the USB cable. The connector
will cause the unit to malfunction if it
gets in touch with any metallic part
of the vehicle.
Microphone
(Accessory 7)
(KIV-BT901 only)
Microphone input
(KIV-BT901 only)
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) which
is stereo type and does not have any
resistance.
Connect to vehicle’s reverse lamp
harness when using the optional
rear view camera.
iPod visual output (“AV Out Set” page 43)
iPod audio output (“AV Out Set” page 43)
For the sake of safety, be sure to connect the
parking sensor.
Connect to the vehicle’s parking brake
detection switch harness.
Light Green (Parking sensor wire)
Purple/White (Reverse sensor wire)
Light Green
(Accessory 3)
iPod
(commercially
available)
USB device
(commercially
available)
Rear View Camera Input
(“R-CAM Interruption”
page 30)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire) · (To car chassis)
Ignition key switch
Car fuse box
(Main fuse)
ACC
Car fuse box
Battery
Blue/White
(Power control wire)
Blue
(Antenna control wire)
When using the optional power amplifier, connect to its power control
terminal.
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film-type or short pole type antenna.
Brown
(Mute control wire)
To car light control switch
To use the steering wheel remote control feature, you need to an exclusive
remote adapter (not supplied) matches your car is required.
Orange / White
(Dimmer control wire)
Light Blue/Yellow
(Steering remote control wire)
To connect the Kenwood navigation system, consult your navigation
manual.
Connect to the terminal that is grounded when either the telephone
rings or during conversation. (KIV-701 only)
KCA-iP202
(option)
CA-U1EX
(option)
If no connections are made, do not
let the wire come out from the tab.
Purple/White
(Accessory 4)