Kenwood KRC-677R Car Stereo System User Manual


 
Function of the KRC-677R
Listen to tapes recorded using the Dolby B NR system.
Turning Dolby NR On/Off:
Press the B NR button to switch Dolby B NR on and off.
The B NR indicator lights up when Dolby B NR is turned on.
Using Dolby B Noise Reduction
Fast Forwarding Tapes:
Press the FM button.
The tape indicator blinks in the direction of the tape as it is
being fast forwarded.
Rewinding Tapes:
Press the AM button.
The tape indicator blinks in the direction of the tape as it is
being rewound.
Cancelling:
Press the PROG button.
Normal tape play returns.
Fast Forwarding and Rewinding Cassette Tapes
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an
appropriate action, then operate the unit.
• Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
NOTE
Loading and Playing Cassettes:
A press of the release button results in the faceplate dropping
open to the front, thereby exposing the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The tape will start playing. Push back on the right
side of the faceplate with your hand until it locks.
The ¢ indicator lights up when a cassette has been loaded.
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing to
do so might deform the tape.
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until the tape mode is
obtained.
“TAPE” is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the other side.
Ejecting Cassettes:
Press the release button and drop open the faceplate.
Press the 0 button located near the cassette insertion slot.
The tape stops playing and the cassette ejects.
Push back on the right side of the faceplate with your hand until
it locks.
• When the faceplate has been dropped open, it might interfere
2CAUTION
0 button
2CAUTION
Playing Cassette Tapes
Cassette player features
— 18 —
English