Filter
Top Products
English
19
3Auto Memory Entry
You can automatically store all the receivable
frequencies in the band currently being listened
to, and then recall them with the touch of a
button later. This function is especially useful
when you are travelling and do not know what
stations are available. Up to 6 frequencies can be
stored this way.
Select the band for auto memory entry.
Touch [ AME ].
[ ¢ ] and [ 4 ] blink.
Touch [ ¢ ] or [ 4 ] to start auto memory entry.
The preset station numbers [ P1 ] - [ P6 ] are shown
in order.
When all the stations in a certain band are stored in
the preset memory, the auto memory entry stops.
The tuner then plays the last station received.
• When the AF function is turned on whilst auto
memory entry takes place, only RDS stations (i.e.,
stations with RDS capability) are stored. RDS
stations that have been preset for FM1 cannot also
be preset in FM2 or FM3.
• When the local seek function is turned whilst auto
memory entry takes place, stations with poor
reception are not stored.
• When the Traffic Information function is on, only the
local traffic information station frequency will be
stored.
3Turning the Monaural Reception On/Off
When poor stereo reception is experienced, this
function will reduce noise and improve listening
conditions.
Touch [ MONO ] to switch the monaural reception on
and off.
The MONO indicator is displayed when monaural
reception is on.
3Selecting the Tuning Mode
You can choose from three tuning modes: auto
seek, preset station seek, and manual. The
“AUTO1” indicator is displayed when auto seek
tuning is selected, and the “AUTO2” indicator is
displayed when preset station seek tuning is
selected.
Each time you touch [ SEEK ], the mode switches as
follows.
▼
AUTO 1 (Auto Seek Tuning)
▼
AUTO 2 (Preset Station Seek Tuning)
▼
MANU (Manual Tuning)
3Turning the Local Seek Function On/Off
With the local seek function turned on, auto seek
tuning skips stations with relatively poor
reception.
Touch [ LO.S ] to switch the local seek function on
and off.
The LO.S indicator is displayed when the local seek
function is on.
NOTE
3
2
1
Tuner Control Screen (Shift)
MENU
FM
FM1 P1 108.0 M
FM- I NFO
Hz
TUNER
PTY
NEWS
REG
AF TI
ST
AM
12:00
ALM
TI
AME
MONO
SEEK
LO.S
TI VOL
MANU