Filter
Top Products
56
12 OPERATOR CONVENIENCES
LOCK FUNCTIONS
FREQUENCY LOCK FUNCTION
Frequency Lock disables some keys and controls to
prevent you from accidentally activating a function or
changing the current settings.
Press and hold [FINE (F.LOCK)] to turn the
Frequency Lock function ON or OFF.
• “
” appears while this function is ON.
The following keys and controls are disabled by
Frequency Lock:
Key Comments
Tuning control Still operates in TF-SET mode.
MULTI/CH
control
Still operates for changing setting
modes.
[ENT]
[M.IN]
Still operates for character
selection and for changing setting
modes.
[SCAN]
Still operates for character
selection and for changing setting
modes. Also still operates for
setting up scan groups (press
and hold).
Mic [UP]
Still operates in TF-SET mode
(in VFO mode) during Menu
mode when the Mic key paddle
operation is ON.
Mic [DWN]
Still operates in TF-SET mode
(in VFO mode) during Menu
mode when the Mic key paddle
operation is ON.
[A/B]
[M/V]
[SPLIT]
Band direct key
[M>V]
[LSB/USB]
[CW/FSK]
[FM/AM]
Still operates to change between
FM and FM Narrow (press and
hold).
[DATA]
[MHz]
[FINE]
Still operates to cancel Frequency
Lock (press and hold).
[CWT]
Still operates to turn AGC ON/
OFF (press and hold).
Key Comments
[CLR]
Still operates to turn Memory
Channel Lockout ON/OFF. Also
still operates to end a setting
mode.
[Q-MR]
Still operates to edit a Memory
name.
[Q-M.IN]
Still operates to set or remove
a Slow Scan Frequency point
(press) or to remove all frequency
points (press and hold).
PROGRAMMABLE FUNCTION KEYS
TRANSCEIVER FRONT PANEL
There are 6 PF (Programmable Function) keys on the
transceiver front panel: [PF A], [PF B], [RIT], [XIT],
[CL], and [MULTI/CH]. You can assign your own
desired functions to these 6 keys by accessing Menu
Nos. 87 (PF A), 88 (PF B), 89 (RIT), 90 (XIT), 91 (CL),
92 (MULTI/CH: except CW mode) and 93 (MULTI/CH:
CW mode).
MICROPHONE KEYS
There are 4 microphone PF (Programmable Function)
keys: [PF1] , [PF2] , [PF3], and [PF4]. You can
assign your own desired functions to these 4 keys
via Menu Nos. 94 to 97. You can also reprogram the
Mic [UP]/ [DWN] keys with your desired function by
accessing Menu Nos. 99 and 98.
Assign one of the following functions to each PF key.
Selecting “OFF” assigns no function to the PF key.
No. Function Remark
00 ~ 99
Menu No.
00 ~ 99
120 RX ANT
121 ATT
122 ANT1/2
123 PRE
124 VOX
Press and hold: enter
the level setup mode.
125 PROC
Press and hold: enter
the level setup mode.
126 SEND
127 AT
Press and hold: start
the antenna tuning.
128 CAR
129 MIC
130 TX-MONI
131 PWR
[MULT/CH] default
(except CW mode)
132 DELAY
133 KEY
[MULT/CH] default (CW
mode)