Filter
Top Products
65
OPERATOR CONVENIENCES 12
Status Announcement
Turn the MULTI/CH
control
Changing the channel
number while in Memory
scroll mode
Empty Channel:
Channel number +
“Blank”
Stored Channel:
Channel number +
(“S” +)
1
Frequency
• Announces when
Menu No. 11 is “1” or “2”
Press [ENT]
While in frequency/
memory channel number
entry mode
“Enter”
Press [ENT], then
press the number keys
Enter the number while
in frequency/ memory
channel number entry
mode
Entered number
Press [ENT], then turn
the MULTI/CH control
Displaying the frequency
history while in
Frequency entry mode
Frequency
Press the number keys
Enter the number while
in memory scroll channel
number entry mode
“Enter” + Entered
number
Press [LSB/USB] + [ ]
While in Auto setting
mode
“Auto” + Channel number
+ Frequency
• Announces when
Menu No. 11 is “1” or “2”
Turn the MULTI/CH
control
Changing the channel
number while in Auto
setting mode
Channel number +
Frequency
• Announces when
Menu No. 11 is “1” or “2”
Press the number keys
Changing the frequency/
mode while in Auto
setting mode
Frequency
• Announces when
Menu No. 11 is “1” or “2”
Press and hold [FINE]
Turning the frequency
lock ON/OFF
“Frequency lock” +
“On”/“Off”
Press [RIT] or [XIT]
While in RIT/XIT
adjusting mode
“X/R/XR” + RIT/XIT
Frequency
4
Press [METER (DRV)]
Changing the meter type
ALC meter: “A”
SWR meter: “R”
COMP meter: “C”
Press and hold
[METER (DRV)]
Changing the Drive
output
Drive output enabled:
“D” + “On”
Drive output disabled:
“D” + “Off”
Status Announcement
Press and hold
[METER (DRV)]
Changing the Antenna
output
Drive output enabled:
“A” + “On”
Drive output disabled:
“A” + “Off”
Press [FM/AM (FM-N)]
+ [ ]
Changing the output
signal for the PC control
terminal
2
CTS/RTS Output Mode:
“CTSRTS on”
PSQ/PKS Output Mode:
“PSQPKS on”
Press [A/B (A=B)] +
[ ], then turn the
MULTI/CH control
Reset confi rmation
during VFO reset
2
“VFO reset?”
Press [A/B (A=B)] +
[ ], then turn the
MULTI/CH control
Reset confi rmation
during Full reset
2
“Full reset?”
1
Announced when operating in Split-frequency mode.
2
Announced even when the auto Voice announcement is OFF.
3
When auto Voice announcement is ON, various confi guration
images appear on the display. When modifi cations are made to
these settings, the new setting is announced.
4
“X/R/XR” + RIT/XIT frequency are announced when either RIT
or XIT is ON. "X/R/XR" are announced as “X” if the only XIT is
ON, “R” if the only RIT is ON, and “XR” if both XIT and RIT are
ON.
VOICE2:
• Pressing [PF] will announce the current state of
the S meter/ RF meter.
• During a voice announcement, pressing [PF] will
cancel the announcement.
VOICE2 Announcements
S meter PWR meter
Dot
position
Announcement
Dot
position
Announcement
0S 00P 0
1 ~ 3 S 1 1 ~ 3 P 5
4 ~ 5 S 2 4 ~ 6 P 10
6 S 3 7 ~ 12 P 25
7 ~ 8 S 4 13 ~ 18 P 50
9 S 5 19 ~ 23 P 75
10 ~ 11 S 6 24 ~ 30 P 100
12 S 7
13 ~ 14 S 8
15 S 9
16 ~ 19 10 dB
20 20 dB
21 ~ 24 30 dB
25 40 dB
26 ~ 29 50 dB
30 60 dB