Filter
Top Products
74
13 CONNECTING PERIPHERAL EQUIPMENT
ALC
GND
RL CONT
GND
COM
MKE
REMOTE
connector
(front view)
TX/RX CONTROL
To connect a linear amplifi er, confi gure to enable the control signal state in Menu No. 59
(HF) and Menu No. 60 (50 MHz), and make the appropriate connections between the
TX/RL control terminals of the TS-590SG and the linear amplifi er.
ANTENNA TUNER
Use the ANT 1 and AT connectors to connect an AT-300 external antenna tuner. If you connect the external
antenna tuner to the ANT 2 connector, it will not function.
Note:
◆ The AT-300 cannot be used for 50 MHz operation.
◆ The AT-300 has been discontinued and is no longer available.
TS-590SG
AT-300
ANT 1
connector
COMPATIBLE TRANSCEIVER
When transferring data to or from another TS-990S, TS-590SG, TS-590S, TS-480HX/SAT, TS-2000/X, TS-570S/D,
or TS-870S, directly connect the 2 transceivers using the COM connectors.
(f) (f)
TS-590SG
RS-232C cross cable
Compatible transceiver
DB-9 connector wiring (Cross-wired)