LG Electronics 22LD35 Car Satellite TV System User Manual


 
101
PICTURE CONTROL
Colour Gamut
(Advanced Control:
Wide/Standard)
Standard : Mode to use original colour area regardless of the display char-
acteristics.
Wide: Mode to use maximum colour area of the TV display.
Maximize the utilization for colour area that can be expressed.
Colour Gamut
(Expert Control: EBU/
SMPTE/BT709/Wide/
Standard)
Standard : Mode to use original colour area regardless of the display char-
acteristics.
Wide : Mode to use maximum colour area of the TV display.
EBU : Mode to display EBU colour area.
SMPTE : Mode to display SMPTE colour area.
BT709 : Mode to display BT709 colour area.
Edge Enhancer
(Off/Low/High)
Makes the edge of the picture clearer and distinctive.
This function can use in “Picture Mode-Expert.”
xvYCC
(Auto/off/on)
*This feature is not available for all models.
This is the function to express richer colour.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC sig-
nal is inputted through HDMI
Expert Pattern
(Off/Pattern1/Pattern2)
This is the pattern necessary for checking the picture of Digital TV.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature
(Medium/Warm/Cool)
This is the function to adjust the overall colour of the screen to the feeling you want.
a. • Method : 2 Points
Pattern: Inner, Outer
Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50
to
+50.
b.
Method : 10 point IRE
Pattern: Inner / Outer
IRE (Institute of Radio Engineers) is the unit to display the size of the video sig-
nal and can be set among 10, 20, 30
to
100. You can adjust Red, Green or Blue
according to each setting.
Luminance: This function displays calculated luminance value for 2.2 gamma.
You can input luminance value you want at 100 IRE, than the target luminance
value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50
to
+50.
Colour Management
System
As the tool used by the experts to make adjustments by using the test pat-
terns, this does not affect other colours but can be used to selectively
adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjust-
ments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment
range is -30
to
+30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment
range is
-30
to
+30.
This feature is disable in RGB-PC and HDMI (PC) mode.
Downloaded From TV-Manual.com Manuals