Filter
Top Products
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
4A8 Printed in the USA
Connecting the Surround-Sound (Rear) Speakers
1. Connect the green conductor to the receiver’s
SURROUND SPEAKERS L
(
+
) red terminal.
2. Connect the other conductor to the receiver’s
SURROUND SPEAKERS L
(
–
) black terminal.
3. Connect the green conductor’s other end to the left surround speaker’s positive (
+
) red terminal.
4. Connect the other conductor’s end to the left surround speaker’s negative (
–
) black terminal.
5. Using the orange wire, repeat Steps 1–4 to connect the right surround speaker to the receiver’s
SURROUND SPEAKERS
right terminals.
Wall Mounting the Speakers
To mount the speakers on a wall, you need wood screws with heads that fit into the keyhole slot on the back of each speak-
er. Make sure the wall surface and screws you use are appropriate for the weight of the speakers. Keep in mind that the
speaker’s vibration will affect the surface, so we do not recommend mounting on plywood boards or other soft-surface
walls.
Drill a hole and thread a screw into the wall, letting the head extend about
1
/
4
inch (6 mm) from the wall. Align the keyhole
slot with the mounting screw and slide the speaker downward to secure it.
L
R
L
R
L
R
CAUTION:
SPEAKER IMPEDANCE
8 ~ 16 / SPEAKER
CENTER
SPEAKER
SURROUND
SPEAKERS
FRONT
SPEAKERS
SUB
WOOFER
PRE
OUT
Orange Green
1
/
4
"
Mounting
Screw
Keyhole Slot
Wall Wall
Incorrect Correct
Gap