Filter
Top Products
8
9
Standard accessories · Optional units
Standard accessories
Power cable x 1 (BT-LH2170P)
Power cable x 2 (BT-LH2170E)
Stand (already attached to the product) x 1
Stand screws (already attached to the product) x 3
CD-ROM x 1
Protection panel mounting screws (8 mm long M3 screws) x 4
• The customer can use these screws for permanent attachment of a protective panel designed for the monitor. (→page 11)
• Tightening torque: Tighten to about 30 N·cm or less
<Note>
After unpacking the monitor, dispose of the AC cord cap (BT-LH2170E only) and packaging material in an appropriate manner.
Optional units
• BT-WMA17G wall mount adapter (Leave installation of the wall mount adapter to authorized personnel.)
Outline
The BT-LH2170P/BT-LH2170E is a compact, flat panel LCD monitor for broadcast and industrial applications, equipped with a
54.6 cm (21.5 inch) (effective display area) LCD display.
High performance LCD panel
This product incorporates a full HD (1920 x 1080) LCD panel.
It offers excellent color reproduction, a wide viewing angle,
and a fast response time.
Superb Moving Image Quality Achieved by New Image
Processing Engine
• A 3D Look Up Table (LUT) and a 10-bit image processing
engine facilitate accurate and smooth gradation from low to
high brightness levels.
• The inclusion of an I/P conversion circuit with a low delay of
less than one field minimizes the delay time between signal
input and monitor display.
• The use of a diagonal line compensation circuit reduces
image degradation in the vertical direction and jagged noise
on diagonal lines.
• The high-speed moving image response time provides vivid
and clear image display.
• Gamma compensation is performed for each monitor.
Includes 3D Assist Functions
Various assist functions are included to allow connecting
the left and right connectors of a 3D camera to the two SDI
inputs and capturing 3D images that are easier to view on a
2D monitor. These functions also make camera adjustments
easier and reduce the preparation time required for 3D shoot-
ing.
Wide Variety of Functions and Interfaces
• Equipped with 3G-SDI, SDI (HD/SD compatible), HDMI,
VIDEO, and DVI-I inputs.
• FOCUS-IN-RED function (Displayed abbreviated to F-IN-R
in the [PICTURE] (picture adjusting) menu.)
Focusing the camera is extremely easy because the area of
the image in focus is displayed in red to make it easy to see
what is in focus.
• WFM (Y/R/G/B) and vectorscope display functions
Capable of showing a Y/R/G/B waveform display for input
signals (3G-SDI, SDI, HDMI, VIDEO, and DVI-I inputs) and
a vectorscope display (for 3G-SDI and SDI inputs).
• Audio volume bar meter display function
There are level displays for embedded 3G-SDI, SDI and
HDMI audio signals and analog audio signals. Furthermore,
support is also included for reference point setting, peak
hold, and overrange display.
The incorporation of a speaker and a HEADPHONES output
jack means you can check the audio. There is also a menu
for selecting channels.
• Closed caption function
The captions added to video signals can be displayed dur-
ing SDI and VIDEO input.
• 2-screen display function
The screen can be split into two to allow you to make a
screen comparison for the same input connectors and same
format. (SUB WINDOW function)
It can display two SDI inputs simultaneously in two
windows. (TWO WINDOW function)
One input signal can be displayed on two windows for
3G-SDI, SDI, HDMI, VIDEO and DVI-I input VIDEO formats
in combination with FOCUS-IN-RED, Y MAP, ZEBRA and
other functions to simplify camera adjustments. (PICTURE
ASSIST function)
• Cross hatch display function
This function displays markers at regular vertical and hori-
zontal intervals to facilitate easy composition.
• External remote control
RS-485, RS-232C and GPI remote control terminals are
provided.
A loop-through connection using the RS-485 input and
output terminals allows control of multiple monitors (up to 32
monitors).
• IMD (in-monitor display) display
The RS-485 interface allows you to display text and the tally
indication on the monitor.