Filter
Top Products
10
Controls and Their Functions
Front panel
2 31
F-IN-R
BT-LH910
CONT./
B.LIGHT
VOLUME/
BRIGHT
PEAK/
PHASE
CHROMA
1
HEADPHONES output jack (M3 stereo mini jack)
Allows you to connect headphones to check the audio when inputting an SDI signal or HDMI signal.
*
The volume and sound quality differ depending on the headphones.
In 3D assist mode, the audio of the SDI1 (L) side can be checked.•
2
POWER switch/lamp
Switches the power supply ON/OFF. When the power is ON, the LED (green) lights up.
3
INPUT SELECT button
Selects the signal input line. Each time the button is pressed, the input changes in the following order:
VIDEO→SDI1→SDI2→HDMI→YP
B
P
R
→VF→INTSG
VIDEO : Video input
SDI1 : Serial digital interface input (compatible with 3G/HD/SD)
SDI2 : Serial digital interface input (compatible with HD/SD)
HDMI : HDMI input
YP
B
P
R
: Analog component input
VF : Viewfinder input (VF-YP
B
P
R
/ VF-VIDEO)
*
1
INT SG: Internal chart for adjustment [Color Bar + Grayscale] (page 74)
The input line when the power supply is switched ON is the one that was selected the last time the •
power was switched OFF. The INPUT SELECT menu settings can be used to skip input lines that are
not used.
In 3D assist mode, the input is fixed to SDI1/SDI2 and the input line cannot be selected.•
When the control lock is on, input lines cannot be selected.•
It is not possible to switch to INT SG when two screens are displayed with the SUB WINDOW function •
(→page42).
The menu is used to set either YP
*
1
B
P
R
or VIDEO for the viewfinder input.