Filter
Top Products
55
3D Assist Mode
(continued)
CONVERGENCE (Convergence Check)
This function is for checking the subject’s position at a fixed screen position in order to determine the depth
position of the main subject.
Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject’s position.
FUNC.
MODE
MANU L SLOW
MANUAL
SPEED
CONV
Screen:
Normal display of one screen
<Assist Points>
The place at which the image does not change is •
the convergence point.
If the camera adjustment (vertical or rotation •
direction position adjustment) is correct, the image
at other than the convergence point will shift to
the left/right target.
The underlined values are factory preset setting values.
Sub menu Operation Settings Description
MODE Knob1 (turn)
MANU
AUTO
Selects the switching method of the L side image and R
side image.
<MANU> Manual switching <AUTO> Automatic switching
MANUAL Knob2 (turn)
L
R
Selects the image to display when the MODE menu is
MANU.
<L> Image of L side <R> Image of R side
SPEED Knob3 (turn)
SLOW
FAST
Selects the speed for when the MODE menu is auto
switching.
<SLOW> Every 1 second
<FAST> Every 4 frames (When 720P: Every 8 frames)
COLOR (Color Check)
This function overlays and displays the SDI1 (L) image and SDI2 (R) image on a checkerboard pattern in
one screen to enable you to check the brightness offset and color differences
FUNC.
SIZE
128
－－
COLR
Screen:
Overlay L/R on one screen.
<Assist Point>
If it is easy to see the borderline of the checkerboard
pattern, the brightness or color of L/R images is
offset.
The underlined values are factory preset setting values.
Sub menu Operation Settings Description
SIZE Knob1 (turn)
128
256
Selects the checkerboard grid size for when overlaying the
image of the L side and image of the R side.
<128> The checkerboard grid consists of squares of 128
samples and 128 lines.
<256> The checkerboard grid consists of squares of 256
samples and 256 lines.